Diferencial Rearmable o con reconexión automática de 2P, 40A, 30 mA (2x40x30 mA) serie Acti9 REDs de la marca Schneider.
Functioning:
- If the leak is transient, it will reset in a period that ranges between 1 and 3 minutes (depending on whether it has made more resets previously).
- The differential distinguishes whether the leak is permanent or transient. If the leak is permanent (longer than 15 seconds), the switch does not reset and locks itself. The installer will have to manually reset it.
- If, just after the reset, the differential falls again (about three minutes), the reset cycle will start again, with a total of 3 attempts. On the fourth, the RED understands that there have been too many transitory leaks and the operator has to go to check the installation and reset it.
- If after resetting the differential, a time greater than three minutes elapses, the cycle resets and no longer takes into account previous untimely jumps.
Differential automatic reconnection Rearmable or 2P, 40A, 30 mA (2x40x30 mA) RED brand series Schneider.
This differential Rearmable allows maximum safety and continuity of service, thanks to its innovative control system insulation, differential reclosers RED reconnect allow optimum safety conditions for people, both residential and tertiary applications.
Technical Characteristics:
- Number of Poles: 2 Poles
- Neutral pole position: Left
- [In] rated current: 40 A
- Earthing system TN-S TT
- Network Type: AC
- Earth leakage sensitivity: 30 mA
- Location device system: Departure
- Rated operating frequency: 50 Hz
- [Ue] aisgnada voltage: 230 V AC 50 Hz phase to neutral
- Reset: Reset earth leakage faults
- Test function: Manual 100 V
- Protec.pérdida ground delay time: Instant
- Type earth leakage protection: Class A
- Leakage resistance: 16 kOhm aloperar - 8kOhm en no operativo
- Cutting capacity and nominal fechamento: IDM 630 to 230 V
- [Ui] rated insulation voltage: 500 V
- [Uimp] rated impulse voltage: 4 kV
- Control Type: Lever
- Local signs: 1 LED verde/rojo - Dispositivo diferencial: señalización ON/OFF - Reconectador: señalización ON/OFF
- Operating mode: Reclose time: 10 s, Maximum operating frequency: 30/hour, Maximum number of consecutive restarts: 3, Minimum interval between 2 closures: 180 s, Insulation fault presence monitoring, Restart cycle stop if insulation fault present, Restart on transient insulation fault.
- Signalling circuit voltage: DC: 5 ... 230 V - CA: 5 ... 230 V
- Mounting mode Fixed
- Mounting options: DIN rail 35mm
- Steps 9 mm: 6
- Dimensions: height 106 mm - Width 54 mm - Depth 82 mm
- Mechanical endurance: 4000 cycles open-close
- Standards: EN 61008 - IEC 61008
- IP Grade: IP20
Reference. SCHNEIDER A9CR4240
The discount applied to the PVP is -50%
