SCHNEIDER 18266 - Differential mA resettable 4x40x30
Product no.: 112015
PVP.
937.99 €
You save 512.04 €
In stock, available in 24 horas
Description
Differential automatic reconnection Rearmable or 4P, 40A, 30 mA (4x40x30 mA) REDS series Schneider brand.
Functioning:
- If the leak is transient, it will reset in a period that ranges between 1 and 3 minutes (depending on whether it has made more resets previously).
- The differential distinguishes whether the leak is permanent or transient. If the leak is permanent (greater than 15 seconds), the switch opens the circuit and every 15 minutes it will carry out an insulation check. In the event that the control is positive (absence of leaks) it will reset and return to service.
- If, just after the reset, the differential falls again (about three minutes), the reset cycle will start again, with a total of 3 attempts. On the fourth, the RED understands that there have been too many transitory leaks and the operator has to go to check the installation and reset it.
- If after resetting the differential, a time greater than three minutes elapses, the cycle resets and no longer takes into account previous untimely jumps.
This differential Rearmable allows maximum safety and continuity of service, thanks to its innovative control system insulation, differential reclosers RED reconnect allow optimum safety conditions for people, both residential and tertiary applications.
If leakage trip (storms, humidity, shot by sympathy, etc.), RED reconnect the installation only if the defect has disappeared, ensuring the safety of people and the system.
Technical Characteristics:
- Number of Poles: 4 Poles
- Neutral pole position: Left
- Composition signaling contacts: 1 NO or 1NC flashing 1Hz
- [In] rated current: 40 A
- Earthing system TN-S TT
- Earth leakage sensitivity: 30 mA
- Location device system: Departure
- Rated operating frequency: 50 Hz
- [Ue] aisgnada voltage: 230 V AC 50 Hz phase to neutral
- Reset: Reset earth leakage faults
- Test function: Manual 100 V
- Protec.pérdida ground delay time: Instant
- Type earth leakage protection: Class A
- Leakage resistance 10 kOhm
- Cutting capacity and nominal fechamento: IDM 630 to 230 V
- [Ui] rated insulation voltage: 500 V
- [Uimp] rated impulse voltage: 4 kV
- Control Type: Lever
- Local signs: 2 LEDs, reset switch indication ON / OFF, Residual Current Device indication: ON / OFF.
- Adjustment Type: Control presence of insulation failure, No. Max consecutive restart Minimum interval between 2 locks, No. operations rearmament Reconeción, Cycle Reset, Restart if I fail transient isolation and arrest attachment cycle reset if fault isolation present.
- Signalling circuit voltage: DC: 5 ... 230 V - CA: 5 ... 230 V
- Mounting mode Fixed
- Mounting options: DIN rail 35mm
- Steps 9 mm 8
- Mechanical endurance: 1000 cycles open-close
- Standards: EN 61008 - IEC 61008
- IP Grade: IP20
Reference. SCHNEIDER 18266
The discount applied to the PVP is -55%
Additional product information
Price reductions
Basket discount
Value above 300.00 €
-
Discount:
3 %
Value above 500.00 €
-
Discount:
5 %